Accurate measurements are the single biggest reason a made-to-measure dress fits well. You do not need a tailor or any special equipment to take them: a soft measuring tape, thin clothing and about fifteen quiet minutes at home are enough. This guide walks through every measurement we ask for, how to take each one correctly, and the mistakes that most often lead to a poor fit.
What You Need Before You Start
All you need is a soft fabric measuring tape, the undergarments you plan to wear with the dress, and a way to note the numbers down. A few simple preparations make every measurement more reliable:
- Measure over thin clothing or your undergarments — never over jumpers, jeans or anything bulky.
- Wear the bra you intend to wear with the dress; it changes your bust measurement more than you might expect.
- Stand relaxed, breathe normally, and keep the tape snug but not pulled tight. The tape should sit flat against your body without digging in.
- Keep the tape level — parallel to the floor — all the way around. A full-length mirror, or a friend to check the back, helps a lot.
- Centimetres or inches are both fine. Send the numbers exactly as you read them; do not round up or add “a little extra”. We add wearing ease ourselves, based on the style.
Bust: Around the Fullest Part
Measure around the fullest part of your bust, keeping the tape under your arms and flat across your shoulder blades at the back. The most common error is letting the tape slip down at the back, which makes the reading smaller than reality. Stand with your arms relaxed at your sides and check in the mirror that the tape is level before you read the number.
Waist: Your Natural Waistline
Your natural waist is the smallest part of your torso, usually just above your belly button — not where your jeans sit. If you are not sure where it is, bend gently to one side: the crease that forms is your natural waistline. Wrap the tape around that line, keep it level, and do not hold your stomach in. A waist measured while you are “posing” will feel uncomfortably tight in the finished dress.
Hips: Around the Fullest Part
Measure around the fullest part of your hips and buttocks, with your feet together. For most people this is noticeably lower than the hip bones, so do not measure where a tape measure “feels” like it belongs. Keep the tape level all the way around and snug against your body.
Hollow to Hem: The Length Measurement
Hollow to hem runs from the hollow at the base of your throat, down over your bust, to where you want the hem to end. Press one end of the tape into that dip between your collarbones and let it fall over the fullest part of your bust to your chosen hem point — the floor for a full-length gown, the knee for a cocktail dress. Wear the shoes you plan to wear, or shoes with the same heel height, and tell us the heel height separately. A hem measured barefoot and worn with heels will come up short.
Shoulder and Height
Shoulder width is measured across your back, from the point of one shoulder to the point of the other. The shoulder point is where your shoulder meets your arm — roughly where a sleeve seam sits. This is the one measurement that is genuinely easier with a helper. For height, stand barefoot with your back against a wall, heels and shoulders touching it, and measure from the floor to the top of your head. Height helps us sanity-check your proportions and set the overall length of the dress correctly.
If your dress has sleeves, we may also ask for your upper arm circumference, measured around the fullest part of your upper arm with your arm relaxed. If we need anything extra for your particular style, we will ask before we start — you do not need to guess.
The Mistakes We See Most Often
Almost every fit problem traces back to one of a handful of measuring mistakes. The ones we see again and again:
- Measuring over thick clothing. Even a fitted jumper can add a centimetre or more to every reading.
- Pulling the tape tight. A tight tape gives a smaller number and a dress that strains at the seams.
- Letting the tape slope. If the tape dips at the back, bust and hip readings come out wrong.
- Adding extra room “just in case”. Send your real body measurements. We build in the right amount of ease for the fabric and style — added centimetres from both sides become a loose dress.
- Using a metal DIY tape. It does not follow the curves of the body. A soft dressmaker’s tape costs very little and is far more accurate.
What Happens After You Send Your Measurements
We review every set of measurements before any fabric is cut — and if a number looks off, we ask before we sew, not after. Sometimes one figure does not sit consistently with the others: a waist that seems too small against the bust and hips, for example, or a hollow-to-hem that does not match the height. When that happens, we double-check that specific measurement with you first. It takes a day at most and prevents the kind of error that cannot be fixed once the dress is made. Once your measurements are confirmed, they become the pattern your dress is cut from — whether you choose a style from our collections or start from your own idea on our Custom Design page.
Ready when you are: take your measurements with this guide open beside you, and send them with your enquiry. If you get stuck on any single measurement, ask us — or browse the styles on our homepage first and measure once you have chosen.
Frequently Asked Questions
Do I need someone to help me take my measurements?
A helper makes the shoulder and back measurements easier and helps keep the tape level, but every measurement in this guide can be taken alone in front of a mirror. If you measure alone, take the shoulder reading twice to be sure.
Should I send my measurements in centimetres or inches?
Either is fine — just tell us which unit you used and send the numbers exactly as you read them, without rounding or adding extra room.
What if my measurements do not match standard dress sizes?
That is exactly what made to measure is for. Your dress is cut from your own pattern, not graded from a standard size, so uneven proportions are normal and expected. We also cross-check your figures for consistency before cutting.
Should I add a few centimetres so the dress is not too tight?
No. Send your exact body measurements. We add the appropriate wearing ease for the style and fabric; if both you and we add room, the dress will end up loose.
When should I take my measurements?
As close to ordering as you reasonably can, and tell us if you expect your weight to change before the event. If anything changes significantly after you order, let us know immediately — before cutting begins, adjustments are simple.
Pingback: Ordering a Dress From a Photo: What to Send and What Happens Next – DIDIAR